review mo naman mga FB stuff mo

i need feedbacks for every product, lalong lalo na yung nocomply single bearing wheels kasi ndi ko pa talaga na try to, FBS tape reviewhin nyo nadin, dFB rin, negative comments are soooo welcome, yung mga tunings review nyo narin, ayoko ng "nice" at "wow" na comments, yung may dating naman, and keep it detailed as possible, para to sa mga nahihirapan mag decide kung anong brands kukunin nila, abangan ko replies nyo, thanks

Goods

-ang ganda nang Kapit
-pawis proof
-di nauupod
-hanang tumatagal lalong sumasarap

-Bads
-Pag luma na mejo nabubutas pag tumama sa edge nang rails

DFB

Goods
-Solid ang Pop
-Pogi Si Master Bike
-ang saya gamitin
-Quality Wise napakamura para sa 500

Bad
(ewan ko kung ako lang yung bobong gumagamit)
pag magasgas na yung mga gilid, di na nakikita yung mga kulay nang plies nyahaha

eto, i've been using TechDeck FB for 3 months. napansin ko lang, di ko matutunan yung KF sa both plastic and wood decks yun ha. ollie lang nagagawa ko.

nung sinubukan ko mag DFB + FBS tape, aba after almost 1 month na pa sundot sundot na pag lalaro nadadali ko yung KF. iba yung pop nung DFB, i guess dahil sa size at shape niya.

dahil din sa size niya, mas nagamay ko din, unlike sa regular TD na napakaliit.

sa FBS tape ko naman, so far wala pa ako nakikitang pangit sa tape na yun.

so ayan ang share ko, para sa baguhan na katulad ko sa pag eFB at para sa mga baguhan din dito sa community, siguro naman ma iimagin niyo ang difference ng TechDeck sa DFB lalo na kung tuned yung DFB mo.

mas marami pa masasabi ang mga master ko dito sa confisk8s, mas madami na silang nagamit na deck at parts at experience wise wala na ko masasabi. kaya ipapaubaya ko na din sa kanila ang pag rereview.

NC wheels...

good:

-smooth like hell
-not too heavy
-cheap

bad:

-dont know what NC wheels model i got

dFB:

good:

-good looking
-weight is just right
-pop is good
i thought i lost that pop i want but im wrong, it was just stains on the end and after i remove it everything is back to normal
-price is very affordable
-great finishing touch

BAD:
-i dont see any bad side about since i bought it...

Over all sa dFB:
5 stars thumbs up salute clap clap speechless...hehe

P.S.
ive been using TD for 9 yrs and i never get consistency i got from my dFB never
pa ako nakagawa trick ng 3x straight pero nung dumating n dFB ko kahit all day long pwd...

Actually i am waiting for my 2nd dFB this friday april 9 2010, all red un no all red..

pa-try lang


dFB

Pros:
..Affordable(Sobrang sulit to sating mga pinoy.. 500 for a wooden deck is an obvious advantage)
..Teh Quality is World Class(woohoo! pang international ang quality ng dFB, binebenta na nga sa FlatFace eh..)
..Cool Plies(Malupit din kulay ng mga Plies, pwede ka pa magpacustomize ng combo mo)
..Good Shape(Inaral ng mabuti ung shape para makapagbigay ng magandang performance sa fingerboarders)

Cons
..Consistency(Minsan may mga decks na naproproduce na medyo may sablay konti sa holes.. kaya minsan mahirap maishoot ung baseplate pero onting kalikot lang eh papasok naman)



The Verdict: kung gusto mong gumaling mag fingerboard.. Buy your dirtyFB now!




FBS Tape

Pros

..Not too grippy(di masyado madikit kaya di nakakairita)
..Best foam tape for your fingerboard(obvious naman na diba?)

Cons

..Expensive(300 for a piece of tape is not that affordable)


The Verdict: Kung may pambili ka, buy ka ng FBS Tape.. worth it to




Tech Deck Wide Trucks

Pros

..Affordable(250 for a set is very nice.. if you want an old school board, then buy the collectors edition for 330..)


Cons

..Consistency(di consistent pagkakagawa sa trucks na to, sa madaling salita, maraming palpak, minsan di pantay ung hangar, mahaba/maikli na axle, sablay na kingpin...)
tsaka di din sya ganun katibay lalo na pag hardcoran ka maglaro..




The Verdict: Eto na ung pinaka basic na trucks kaya eto nadin ung pwede mong bilhin para sa wooden board mo.. buti nalang pwede ka mamili ng trucks kay bike, para piliin mo na ung pantay! yeah.. good buy din to

Dagdagan ko pa ung reviews ko.. bwelo lang onti ehehe

dfb
pros:
*maganda ang shape
*maganda ang concave
*maganda ang pop
*pwede mag pa customize ng kulay
*murang mura
cons:
*wag kakabitan ng super kapit na sticker tapos aalisin den..kase sasama yung kahoy sa sticker
*hindi na nakikita yung mga plies sa nose at tail pag pinang laro mo nang hardcoran (no big deal)
*nachichips den (normal lang to)

fbs
pros:
*super sarap gamitin
*makapet pero hindi malagket
*manipis kaya damang dama
*madali ikabet

cons:
*yung saken madali machipsan yung mga giled
*kulangoten
*may kamahalan pero worth it naman dahil ang sarap gamitin (pero may mga options ka naman kung low budget ka)

no comply wheels
pros:
*super smooth (makukuntento ka na)
*parang parehas lang den sa dual bearing pag sa granite or tiles mo ginamet
*mura lang

cons:
*mas malaki sya sa normal pero ok lang..depende pa din sayo yun.

tech deck trucks:

pros:
*madali hagilapen
*madali remedyohan
*mura

cons:
*minsan hindi pantay
*mabilis mabasag yung hanger yung bandang kingpin
*nahuhugot yung axle


tricks lang ang walang bayad.syempre depende paren yun kung pano mo lalaruen..lahat naman ng pyesa magaganda.pero hindi lahat makukuha mo.kahit bumile ka ng mamahaleng pyesa yung pinakamahal pa masisira den yan pag oras na nyang masira.pero kung enjoyment ang hanap mo anjan na lahat ng info.pili ka nalang.kung anong nasa puso mo sundin mo.get get aw!

DFB deck + FBS

Tech deck user ako for almost forever (lol, not consistent though), TD boards is hard to catch, hard to KF then tailslide etc.

When I started using DFB (kahit wala pang 1 month) , medyo nasasanay na ko, sarap mag-KF at saluhin sa ere.. pop, ramdam na ramdam. DAMA mo. haha

WIDE=GOOD

Yun lang marereview ko since TD wide trucks ang gamit ko + TD tuning _ TD wheels, di ko lam sasabihin ko dito since ok naman siya para sa akin, alam ko mas ok kung may tuning ito at bearing wheels ang gamit ko.. hehe

un lang ^^

REGARDING SA DECK...
OK sya but for me it would be better if kung pwede pa iangat ung kicks...
id like to ask Mr. Vergara IF he could come up with a new high kick molds....
AND ADDITON TO THIS i know na may coat ung top ply nya pero manipis diba.ito ang napansin ko kawawa ka if masira ang base plate mo at bago pa ang fbs kasi napakahirap nyang tangalin and for sure 70-80% masisisra ang tape mo pag tinanggal mo diba minsan pag dkina kuntento sa tape mo at may budjai ka gusto mo mag palit for sure d mo na maililipat sa ibang deck mo ung old tape kasi punit punit na ung ilalim or puro crack na i mean...

NO COMPLY S.B
GOOD REVIEW
-SMOOTH
-MATERIAL OF THE WHEEL IS GOOD

NEGATIVE REVIEW
-NEED MO SYA I TUNE EVERY NOW AND THEN KASI ONCE NA DUSTY NA YUNG LOOB NAG START NA SYANG MAGING HINDI SMOOTH
-WASHER NYA IS QUIT THICK KAYA PAG HINDI MAGANDA ANG TRUCKS MO AT NAKA ATTACH UNG WASHER HINDI SYA MAGROLL

FBS
-never get this item wet

MASTER LAM KO D AKO MAGALING MAGLARO AND EXP. WISE MAS MATAAS ANG SAYO I MADE DIS KASI ITO UNG MGA NA INCOUNTER KO HEHEHEHE PEACE...

just got them today!

They are as smooooth as butter. They perform pretty much the same as the nc single bearing wheels (biggies) in terms of the spinning. I think what makes V6 better than NC single bearing biggies is that V6's are much stabler in the axle (not wiggling as much as the single bearing biggies does when you move them about in the axle) and the shape is much better!

Crlcrack said that there was a review about V6's saying that V6's gets stuck up every other trick, well, I think the person who said that tightened the nut too much leaving the bearings with no room to spin. So there!

Hope this helps!

reppepp wrote:

just got them today!

They are as smooooth as butter. They perform pretty much the same as the nc single bearing wheels (biggies) in terms of the spinning. I think what makes V6 better than NC single bearing biggies is that V6's are much stabler in the axle (not wiggling as much as the single bearing biggies does when you move them about in the axle) and the shape is much better!

Crlcrack said that there was a review about V6's saying that V6's gets stuck up every other trick, well, I think the person who said that tightened the nut too much leaving the bearings with no room to spin. So there!

Hope this helps!

wow what's the size comparison to the g7a's you have?

venzov wrote:

reppepp wrote:

just got them today!

They are as smooooth as butter. They perform pretty much the same as the nc single bearing wheels (biggies) in terms of the spinning. I think what makes V6 better than NC single bearing biggies is that V6's are much stabler in the axle (not wiggling as much as the single bearing biggies does when you move them about in the axle) and the shape is much better!

Crlcrack said that there was a review about V6's saying that V6's gets stuck up every other trick, well, I think the person who said that tightened the nut too much leaving the bearings with no room to spin. So there!

Hope this helps!

wow what's the size comparison to the g7a's you have?

I'll post some pics later to show the comparison!

DFB Deck..

Pros

-Perfect fusion of woods
-I like the lacquer coat on the side of the deck
-CONSISTENT weight and pop you can request or custom to your preferred weight...
-I like the shape and concave especially the later production
-I like the veneers used for blank decks (i forgot the term of the wood consistency present on a dfb maple bottom)
-I like the pop of the dfb
-Good customer service and terms, The owner is very soft spoken and gentleman wag mo lang gagaguhin...

Cons
-Some of my decks have inconsistent shape (kicks di pantay ang triangular shape)
-The kingpin hole's diameter is small (no issues with that you can always use a bigger Philip screw to force the kingpin to fit in the deck TD tools will sometimes break)
-I like the graphic deck so much!!! But on a personal opinion i don't like the color combination used on the bottom ply. (Yung parang apoy ok pero may mga design na di match yung colors like navy blue then red tas yellow for me parang off)